КИТА unofficial

root@enginer:/usr/pgsrc# ./configure
checking build system type... i686-pc-linux-gnulibc1
checking host system type... i686-pc-linux-gnulibc1
checking target system type... i686-pc-linux-gnulibc1
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for sed... /bin/sed
checking for gcc... gcc
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.

configure:3417: checking for C compiler default output file name
configure:3444: gcc    conftest.c  >&5
/usr/bin/ld: crt1.o: No such file: No such file or directory

 find /etc -name smb* 

[alder@freedom] hdparm -t /dev/hda (вместо /dev/hda впиши свой девайс) и
[alder@freedom] hdparm -iv /dev/hda

mount -t smbfs -o iocharset=koi8-r,codepage=cp866,username=administrator //PCname/share /mnt/share

вместо administrator писать имя пользователя на удаленном компьютере. 
возможно через : понадобится указать пароль
PCname - имя удаленного компьютера
share - имя расшаренной папки

cd /mnt
ls -l

drwxr-xr-x 2 root root  4096 2006-09-26 04:02 cdrecorder
drwxr-xr-x 2 root root  4096 2002-03-16 09:34 cdrom
drwxr-xr-x 2 root root  4096 2006-09-26 04:02 dvd
drwxr-xr-x 2 root root  4096 2002-03-16 09:34 floppy
drwxr-xr-x 2 root root  4096 2002-03-16 09:34 hd
dr-x------ 1 root root 57344 2008-03-07 06:23 hda1_c
dr-x------ 1 root root  4096 2008-03-03 17:54 hda5_d
drwxr-xr-x 2 root root  4096 2006-09-26 04:02 memory
-rw-r--r-- 1 root root   376 2006-09-26 06:09 README
dr-x------ 1 root root  8192 2008-03-03 17:54 sda1_MY_BOOK
drwxr-xr-x 2 root root  4096 2006-09-26 04:03 tmp
drwxr-xr-x 2 root root  4096 2006-09-26 04:02 zip

dr-x------ 1 root root 57344 2008-03-07 06:23 hda1_c
dr-x------ 1 root root  4096 2008-03-03 17:54 hda5_d

binding "my-bindings"
{
bind "Return" { "insert-at-cursor" ("\n") }
bind "<ctrl>Return" { "message_send" () }
}
widget "*pidgin_conv_entry" binding "my-bindings"
binding "my-bindings"
{
bind "Return" { "insert-at-cursor" ("\n") }
bind "<ctrl>Return" { "message_send" () }
}
widget "*pidgin_conv_entry" binding "my-bindings"

pidgin:19537): Gdk-CRITICAL **: gdk_display_get_name: assertion `GDK_IS_DISPLAY              (display)' failed
Pidgin 2.2.0

** (pidgin:19537): WARNING **: cannot open display: unset

INIT: cannot execute "/sbin/agetty"
INIT: ld "c1" respawning too fast: disabled for 5 minutes
INIT: ld "c2" respawning too fast: disabled for 5 minutes
INIT: ld "c3" respawning too fast: disabled for 5 minutes
INIT: ld "c4" respawning too fast: disabled for 5 minutes
INIT: ld "c5" respawning too fast: disabled for 5 minutes
INIT: ld "c6" respawning too fast: disabled for 5 minutes
INIT: no more process left in this runlevel

/dev/hda6        /                	ext3        users,defaults      		1   1
/dev/hda1        /mnt/hda1_c      	ntfs        users,ro,nls=koi8-r 		1   0
/dev/hda5        /mnt/hda5_d      	ntfs        users,ro,nls=koi8-r 		1   0
/dev/sda1        /mnt/sda1_MY_BOOK 	ntfs        users,ro,nls=koi8-r 		1   0
/dev/cdrom       /mnt/cdrom       	iso9660     noauto,users,ro,nls=koi8-r	 	0   0
/dev/fd0         /mnt/floppy      	auto        noauto,users     			0   0
devpts           /dev/pts         	devpts      gid=5,mode=620   			0   0
proc             /proc            	proc        defaults         			0   0
/dev/sdb1        /mnt/hd          	auto        noauto,users,rw,nls=koi8-r	 	0   0

#
# inittab	This file describes how the INIT process should set up
#		the system in a certain run-level.
#
# Version:	@(#)inittab		2.04	17/05/93	MvS
#                                       2.10    02/10/95        PV
#                                       3.00    02/06/1999      PV
#                                       4.00    04/10/2002      PV
#
# Author:	Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
# Modified by:	Patrick J. Volkerding, <volkerdi@slackware.com>
#

# These are the default runlevels in Slackware:
#   0 = halt
#   1 = single user mode
#   2 = unused (but configured the same as runlevel 3)
#   3 = multiuser mode (default Slackware runlevel)
#   4 = X11 with KDM/GDM/XDM (session managers)
#   5 = unused (but configured the same as runlevel 3)
#   6 = reboot

# Default runlevel. (Do not set to 0 or 6)
id:3:initdefault:

# System initialization (runs when system boots).
si:S:sysinit:/etc/rc.d/rc.S

# Script to run when going single user (runlevel 1).
su:1S:wait:/etc/rc.d/rc.K

# Script to run when going multi user.
rc:2345:wait:/etc/rc.d/rc.M

# What to do at the "Three Finger Salute".
ca::ctrlaltdel:/sbin/shutdown -t5 -r now

# Runlevel 0 halts the system.
l0:0:wait:/etc/rc.d/rc.0

# Runlevel 6 reboots the system.
l6:6:wait:/etc/rc.d/rc.6

# What to do when power fails.
pf::powerfail:/sbin/genpowerfail start

# If power is back, cancel the running shutdown.
pg::powerokwait:/sbin/genpowerfail stop

# These are the standard console login getties in multiuser mode:
c1:1235:respawn:/sbin/agetty 38400 tty1 linux
c2:1235:respawn:/sbin/agetty 38400 tty2 linux
c3:1235:respawn:/sbin/agetty 38400 tty3 linux
c4:1235:respawn:/sbin/agetty 38400 tty4 linux
c5:1235:respawn:/sbin/agetty 38400 tty5 linux
c6:12345:respawn:/sbin/agetty 38400 tty6 linux

# Local serial lines:
#s1:12345:respawn:/sbin/agetty -L ttyS0 9600 vt100
#s2:12345:respawn:/sbin/agetty -L ttyS1 9600 vt100

# Dialup lines:
#d1:12345:respawn:/sbin/agetty -mt60 38400,19200,9600,2400,1200 ttyS0 vt100
#d2:12345:respawn:/sbin/agetty -mt60 38400,19200,9600,2400,1200 ttyS1 vt100

# Runlevel 4 used to be for an X window only system, until we discovered
# that it throws init into a loop that keeps your load avg at least 1 all 
# the time. Thus, there is now one getty opened on tty6. Hopefully no one
# will notice. ;^)
# It might not be bad to have one text console anyway, in case something 
# happens to X.
x1:4:respawn:/etc/rc.d/rc.4

# End of /etc/inittab

# These are the default runlevels in Slackware:
# 0 = halt
# 1 = single user mode
# 2 = unused (but configured the same as runlevel 3)
# 3 = multiuser mode (default Slackware runlevel)
# 4 = X11 with KDM/GDM/XDM (session managers)
# 5 = unused (but configured the same as runlevel 3)
# 6 = reboot

# Default runlevel. (Do not set to 0 or 6)
id:3:initdefault:

# System initialization (runs when system boots).
si:S:sysinit:/etc/rc.d/rc.S

# Script to run when going single user (runlevel 1).
su:1S:wait:/etc/rc.d/rc.K

# Script to run when going multi user.
rc:2345:wait:/etc/rc.d/rc.M

# What to do at the "Three Finger Salute".
ca::ctrlaltdel:/sbin/shutdown -t5 -r now

# Runlevel 0 halts the system.
l0:0:wait:/etc/rc.d/rc.0

# Runlevel 6 reboots the system.
l6:6:wait:/etc/rc.d/rc.6

# What to do when power fails.
pf::powerfail:/sbin/genpowerfail start

# If power is back, cancel the running shutdown.
pg::powerokwait:/sbin/genpowerfail stop

# These are the standard console login getties in multiuser mode:
c1:1235:respawn:/sbin/agetty 38400 tty1 linux
c2:1235:respawn:/sbin/agetty 38400 tty2 linux
#c3:1235:respawn:/sbin/agetty 38400 tty3 linux
#c4:1235:respawn:/sbin/agetty 38400 tty4 linux
#c5:1235:respawn:/sbin/agetty 38400 tty5 linux
#c6:12345:respawn:/sbin/agetty 38400 tty6 linux

# Local serial lines:
#s1:12345:respawn:/sbin/agetty -L ttyS0 9600 vt100
#s2:12345:respawn:/sbin/agetty -L ttyS1 9600 vt100

# Dialup lines:
#d1:12345:respawn:/sbin/agetty -mt60 38400,19200,9600,2400,1200 ttyS0 vt100
#d2:12345:respawn:/sbin/agetty -mt60 38400,19200,9600,2400,1200 ttyS1 vt100

# Runlevel 4 used to be for an X window only system, until we discovered
# that it throws init into a loop that keeps your load avg at least 1 all 
# the time. Thus, there is now one getty opened on tty6. Hopefully no one
# will notice. ;^)
# It might not be bad to have one text console anyway, in case something 
# happens to X.
x1:4:respawn:/etc/rc.d/rc.4

# End of /etc/inittab

chroot /dev/hda5

knoppix@Knoppix:/dev$ sudo chroot /dev/hda6
chroot: cannot change root directory to /dev/hda6: Not a directory

root@Knoppix:/dev# mount /dev/hda6 /media/hda6
root@Knoppix:/dev# chroot /dev/hda6
chroot: cannot change root directory to /dev/hda6: Not a directory

root@Knoppix:/dev# chroot /media/hda6

<?xml version="1.0" encoding="KOI8-R"?>

<deviceinfo version="0.2">
  <device>
    <match key="volume.fstype" string="ntfs">
      <match key="@block.storage_device:storage.hotpluggable" bool="true">
        <merge key="volume.fstype" type="string">ntfs-3g</merge>
        <merge key="volume.policy.mount_filesystem" type="string">ntfs-3g</merge>
        <append key="volume.mount.valid_options" type="strlist">locale=</append>
        <merge key="volume.policy.mount_option.locale=ru_RU.KOI8-R" type="bool">true</merge>
      </match>
    </match>
  </device>
</deviceinfo>

<?xml version="1.0" encoding="KOI8-R"?>

<deviceinfo version="0.2">
  <device>
    <match key="volume.fstype" string="vfat">
      <match key="@block.storage_device:storage.hotpluggable" bool="true">
        <merge key="volume.fstype" type="string">vfat</merge>
        <merge key="volume.policy.mount_filesystem" type="string">vfat</merge>
        <append key="volume.mount.valid_options" type="strlist">iocharset=</append>
        <merge key="volume.policy.mount_option.iocharset=ru_RU.KOI8-R" type="bool">true</merge>
      </match>
    </match>
  </device>
</deviceinfo>

bash-3.1# Launched ok, pid = 15418
kio_bluetooth: *** Starting kio_bluetooth
kio_bluetooth: KioBluetooth::KioBluetooth()
kio_bluetooth: [KBluetooth::DBusSignal::DBusSignal(const QString&, const QStrin
g&, const QString&, DBusConnection*)] : org.bluez path: /org/bluez interface: o
rg.bluez.Manager conn: 0x80b34f8
kio_bluetooth: [DBusMessage* KBluetooth::DBusSignal::newMessage(const QString&)
] : org.bluez path: /org/bluez mInterfacE: org.bluez.Manager method: DefaultAda
pter
kio_bluetooth: libkbluetooth: getString(DefaultAdapter): The name org.bluez was
 not provided by any .service files
kio_bluetooth: [KBluetooth::DBusSignal::DBusSignal(const QString&, const QStrin                                g&, const QString&, DBusConnection*)] : org.bluez path:  interface: org.bluez.A                                dapter conn: 0x80b34f8
kio_bluetooth: Adding match failed: org.freedesktop.DBus.Error.MatchRuleInvalid                                : Path '' is invalid
kio_bluetooth:
kio_bluetooth: kio_bluetooth::stat(bluetooth:/)
kio_bluetooth: kio_bluetooth::listdir() (/)
kio_bluetooth: kio_bluetooth::doListBrowse()
kio_bluetooth: [DBusMessage* KBluetooth::DBusSignal::newMessage(const QString&)                                ] : org.bluez path:  mInterfacE: org.bluez.Adapter method: IsPeriodicDiscovery
process 15441: arguments to dbus_message_new_method_call() were incorrect, asse                                rtion "_dbus_check_is_valid_path (path)" failed in file dbus-message.c line 107                                4.
This is normally a bug in some application using the D-Bus library.
  D-Bus not built with -rdynamic so unable to print a backtrace
kioslave: ####### CRASH ###### protocol = kio_bluetooth pid = 15441 signal = 6
kbluetooth: [DBusMessage* KBluetooth::DBusSignal::newMessage(const QString&)] :                                 org.bluez path: /org/bluez mInterfacE: org.bluez.Security method: UnregisterDe                                faultPasskeyAgent
kbluetooth: libkbluetooth: setString(UnregisterDefaultPasskeyAgent): The name o                                rg.bluez was not provided by any .service files
bash-3.1# ICE default IO error handler doing an exit(), pid = 15453, errno = 11

Section "Monitor"
	#DisplaySize	  # mm

cp arch/x86/boot/bzImage /boot

#boot=/dev/sda
default=0
timeout=3
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.30.8-64.fc11.i686.PAE)
	root (hd0,0)
	kernel /boot/vmlinuz-2.6.30.8-64.fc11.i686.PAE ro root=UUID=d537fc22-6698-4fb5-bff8-c5c3b86e051e rhgb quiet
	initrd /boot/initrd-2.6.30.8-64.fc11.i686.PAE.img
title Russian Fedora Remix (2.6.30.5-43.fc11.i686.PAE)
	root (hd0,0)
	kernel /boot/vmlinuz-2.6.30.5-43.fc11.i686.PAE ro root=UUID=d537fc22-6698-4fb5-bff8-c5c3b86e051e rhgb quiet
	initrd /boot/initrd-2.6.30.5-43.fc11.i686.PAE.img
title RFRemix (2.6.29.4-167.fc11.i686.PAE)
	root (hd0,0)
	kernel /boot/vmlinuz-2.6.29.4-167.fc11.i686.PAE ro root=UUID=d537fc22-6698-4fb5-bff8-c5c3b86e051e rhgb quiet
	initrd /boot/initrd-2.6.29.4-167.fc11.i686.PAE.img
title Other
	rootnoverify (hd0,4)
	chainloader +1
title FedoraNew (2.6.30.4)
	root(hd0,0)
	kernel /boot/bzImage root=/dev/sda1
	initrd /boot/initrd-2.6.30.4.img

make bzImage modules modules_install install

make modules_installs

ls /lib/modules 

mkinirtd /boot/initrd-new_kernel 2.6.31.4

netstat -tup

mplayer tv:// -tv driver=v4l2:device=/dev/video0